Respuestas rápidas
- ¿Para qué se usa Ampicillin sodium and sulbactam sodium?
- La etiqueta aprobada por la FDA (Ampicillin and Sulbactam, Eugia US LLC, 12 de agosto de 2025) dice, en inglés: “Ampicillin and sulbactam for injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli, * Klebsiella spp. * (including K. …” Esta página no es un consejo médico. Hable con su médico o farmacéutico antes de empezar, dejar o cambiar cualquier medicamento.
- ¿Cuáles son los efectos secundarios de Ampicillin sodium and sulbactam sodium?
- La sección «Adverse Reactions» (reacciones adversas) de la etiqueta de la FDA (Ampicillin and Sulbactam, Eugia US LLC, 12 de agosto de 2025) comienza así, en inglés: «Adult Patients Ampicillin and sulbactam for injection is generally well tolerated. The following adverse reactions have been reported in clinical trials. Local Adverse Reactions Pain at IM injection site – 16% Pain at IV injection site – 3% Thrombophlebitis – 3% Phlebitis – 1.2% Systemic Adverse Reactions The most frequently reported adverse reactions were diarrhea in 3% of the patients and rash in less than 2% of the patients.» … Esta página no es un consejo médico. Hable con su médico o farmacéutico antes de empezar, dejar o cambiar cualquier medicamento.
- ¿Qué interacciones tiene Ampicillin sodium and sulbactam sodium?
- La sección «Drug Interactions» (interacciones) de la etiqueta de la FDA (Ampicillin and Sulbactam, Eugia US LLC, 12 de agosto de 2025) comienza así, en inglés: «Probenecid decreases the renal tubular secretion of ampicillin and sulbactam. Concurrent use of probenecid with ampicillin and sulbactam may result in increased and prolonged blood levels of ampicillin and sulbactam. The concurrent administration of allopurinol and ampicillin increases substantially the incidence of rashes in patients receiving both drugs as compared to patients receiving ampicillin alone.» … Esta página no es un consejo médico. Hable con su médico o farmacéutico antes de empezar, dejar o cambiar cualquier medicamento.
- ¿Ampicillin sodium and sulbactam sodium tiene una advertencia en recuadro?
- La etiqueta que citamos no tiene advertencia en recuadro, pero 1 de 25 etiquetas de la FDA de este medicamento sí la tienen. Revise la etiqueta de su producto.
- ¿Hay escasez de Ampicillin sodium and sulbactam sodium?
- La FDA no indica una escasez actual para los productos de este medicamento (datos de la FDA del 13 de noviembre de 2026).
- ¿Se ha retirado del mercado Ampicillin sodium and sulbactam sodium?
- Los informes de la FDA indican 3 retiros de productos de este medicamento; el más reciente comenzó el 29 de mayo de 2020 (Clase II). Un retiro suele afectar a lotes concretos, no a todos los productos.
- ¿Quién fabrica Ampicillin sodium and sulbactam sodium?
- 12 empresas tienen productos con receta de Ampicillin sodium and sulbactam sodium en el directorio NDC de la FDA, entre ellas Eugia US LLC, Meitheal Pharmaceuticals Inc. y WG Critical Care, LLC.
Para qué se usa Ampicillin sodium and sulbactam sodium
Cita de la sección «Indications and Usage» (indicaciones y uso) de la etiqueta aprobada por la FDA. Se muestra en inglés, tal como la publica la FDA.
Ampicillin and sulbactam for injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli, * Klebsiella spp. * (including K. …
— Etiqueta de la FDA: Ampicillin and Sulbactam, Eugia US LLC, vigente desde el 12 de agosto de 2025. Leer la etiqueta completa en DailyMed →
Etiqueta citada: la de la presentación más común (injection, powder, for solution, intravenous), Ampicillin and Sulbactam, Eugia US LLC; abarca 4 productos del directorio NDC de la FDA. Las citas sobre efectos secundarios, interacciones, dosis y embarazo de abajo vienen de esta misma etiqueta.
La FDA tiene 25 etiquetas para productos de este medicamento (distintos fabricantes y presentaciones); los usos pueden variar. Revise la etiqueta de su propio medicamento.
Esta página no es un consejo médico. Hable con su médico o farmacéutico antes de empezar, dejar o cambiar cualquier medicamento.
Advertencia en recuadro
La advertencia en recuadro («caja negra») es la advertencia más seria de la FDA en la etiqueta de un medicamento, para riesgos graves o mortales.
La etiqueta citada arriba no tiene advertencia en recuadro.
1 de 25 etiquetas de la FDA de este medicamento tienen advertencia en recuadro.
Efectos secundarios de Ampicillin sodium and sulbactam sodium
Cita de la sección «Adverse Reactions» (reacciones adversas) de la etiqueta aprobada por la FDA. Se muestra en inglés. Avise a su médico de cualquier efecto secundario que le preocupe.
Adult Patients Ampicillin and sulbactam for injection is generally well tolerated. The following adverse reactions have been reported in clinical trials. Local Adverse Reactions Pain at IM injection site – 16% Pain at IV injection site – 3% Thrombophlebitis – 3% Phlebitis – 1.2% Systemic Adverse Reactions The most frequently reported adverse reactions were diarrhea in 3% of the patients and rash in less than 2% of the patients.
Leer más de esta sección
Additional systemic reactions reported in less than 1% of the patients were: itching, nausea, vomiting, candidiasis, fatigue, malaise, headache, chest pain, flatulence, abdominal distension, glossitis, urine retention, dysuria, edema, facial swelling, erythema, chills, tightness in throat, substernal pain, epistaxis and mucosal bleeding. Pediatric Patients Available safety data for pediatric patients treated with ampicillin and sulbactam demonstrate a similar adverse events profile to those observed in adult patients. Additionally, atypical lymphocytosis has been observed in one pediatric patient receiving ampicillin and sulbactam for injection. Adverse Laboratory Changes Adverse laboratory changes without regard to drug relationship that were reported during clinical trials were: Hepatic: Increased AST (SGOT), ALT (SGPT), alkaline phosphatase, and LDH. Hematologic: Decreased hemoglobin, hematocrit, RBC, WBC, neutrophils, lymphocytes, platelets and increased lymphocytes, monocytes, basophils, eosinophils, and platelets. Blood Chemistry: Decreased serum albumin and total proteins. Renal: Increased BUN and creatinine. Urinalysis: Presence of RBC's and hyaline casts in urine. Postmarketing Experience In addition to adverse reactions reported from clinical trials, the following have been identified during post-marketing use of ampicillin sodium/sulbactam sodium or other products containing ampicillin. Because they are reported voluntarily from a population of unknown size, estimates of frequency cannot be made. These events have been chosen for inclusion due to a combination of their seriousness, frequency, or potential causal connection to ampicillin sodium/sulbactam sodium. Blood and Lymphatic System Disorders: Hemolytic anemia, thrombocytopenic purpura, and agranulocytosis have been reported. These reactions are usually reversible on discontinuation of therapy and are believed to be hypersensitivity phenomena. Some individuals have developed positive direct Coombs Tests during treatment with ampicillin and sulbactam for injection, as with other beta-lactam antibacterials. Gastrointestinal Disorders: Abdominal pain, cholestatic hepatitis, cholestasis, hyperbilirubinemia, jaundice, abnormal hepatic function, melena, gastritis, stomatitis, dyspepsia, black “hairy” tongue, and Clostridium difficile associated diarrhea (see CONTRAINDICATIONS and WARNINGS sections). General Disorders and Administration Site Conditions: Injection site reaction Immune System Disorders: Serious and fatal hypersensitivity (anaphylactic) reactions (see WARNINGS section), Acute myocardial ischemia with or without myocardial infarction may occur as part of an allergic reaction.
— Etiqueta de la FDA: Ampicillin and Sulbactam, Eugia US LLC, vigente desde el 12 de agosto de 2025. Esto es solo una parte de la sección. Leer la etiqueta completa en DailyMed →
Interacciones de Ampicillin sodium and sulbactam sodium
Cita de la sección «Drug Interactions» (interacciones) de la etiqueta aprobada por la FDA. Se muestra en inglés. Dígale a su farmacéutico todos los medicamentos, vitaminas y productos herbales que toma.
Probenecid decreases the renal tubular secretion of ampicillin and sulbactam. Concurrent use of probenecid with ampicillin and sulbactam may result in increased and prolonged blood levels of ampicillin and sulbactam. The concurrent administration of allopurinol and ampicillin increases substantially the incidence of rashes in patients receiving both drugs as compared to patients receiving ampicillin alone.
Leer más de esta sección
It is not known whether this potentiation of ampicillin rashes is due to allopurinol or the hyperuricemia present in these patients. There are no data with ampicillin and sulbactam and allopurinol administered concurrently. Ampicillin and sulbactam and aminoglycosides should not be reconstituted together due to the in vitro inactivation of aminoglycosides by the ampicillin component of ampicillin and sulbactam.
— Etiqueta de la FDA: Ampicillin and Sulbactam, Eugia US LLC, vigente desde el 12 de agosto de 2025. Leer la etiqueta completa en DailyMed →
Dosis de Ampicillin sodium and sulbactam sodium
Cita de la sección «Dosage and Administration» (dosis y administración) de la etiqueta aprobada por la FDA. Se muestra en inglés. Su dosis es la que le receta su médico: no la cambie por su cuenta.
Ampicillin and sulbactam for injection may be administered by either the IV or the IM routes. For IV administration, the dose can be given by slow intravenous injection over at least 10 to 15 minutes or can also be delivered in greater dilutions with 50 to 100 mL of a compatible diluent as an intravenous infusion over 15 to 30 minutes. Ampicillin and sulbactam for injection may be administered by deep intramuscular injection.
Leer más de esta sección
(see DIRECTIONS FOR USE-Preparation for Intramuscular Injection section). The recommended adult dosage of ampicillin and sulbactam for injection is 1.5 g (1 g ampicillin as the sodium salt plus 0.5 g sulbactam as the sodium salt) to 3 g (2 g ampicillin as the sodium salt plus 1 g sulbactam as the sodium salt) every six hours. This 1.5 to 3 g range represents the total of ampicillin content plus the sulbactam content of ampicillin and sulbactam for injection, and corresponds to a range of 1 g ampicillin/0.5 g sulbactam to 2 g ampicillin/1 g sulbactam. The total dose of sulbactam should not exceed 4 grams per day. Pediatric Patients 1 Year of Age or Older The recommended daily dose of ampicillin and sulbactam for injection in pediatric patients is 300 mg per kg of body weight administered via intravenous infusion in equally divided doses every 6 hours. This 300 mg/kg/day dosage represents the total ampicillin content plus the sulbactam content of ampicillin and sulbactam for injection, and corresponds to 200 mg ampicillin/100 mg sulbactam per kg per day. The safety and efficacy of ampicillin and sulbactam for injection administered via intramuscular injection in pediatric patients have not been established. Pediatric patients weighing 40 kg or more should be dosed according to adult recommendations, and the total dose of sulbactam should not exceed 4 grams per day. The course of intravenous therapy should not routinely exceed 14 days. In clinical trials, most children received a course of oral antimicrobials following initial treatment with intravenous ampicillin and sulbactam for injection. (see CLINICAL STUDIES section). Impaired Renal Function In patients with impairment of renal function the elimination kinetics of ampicillin and sulbactam are similarly affected, hence the ratio of one to the other will remain constant whatever the renal function. The dose of ampicillin and sulbactam in such patients should be administered less frequently in accordance with the usual practice for ampicillin and according to the following recommendations: TABLE 3 Ampicillin and Sulbactam for Injection Dosage Guide for Patients with Renal Impairment Creatinine Clearance (mL/min/1.73m 2) Ampicillin/Sulbactam Half-Life (Hours) Recommended Ampicillin and Sulbactam for Injection Dosage 30 1 1.5 to 3 g q 6h to q 8h 15 to 29 5 1.5 to 3 g q 12h 5 to 14 9 1.5 to 3 g q 24h When only serum creatinine is available, the following formula (based on sex, weight, and age of the patient) may be used to convert this value into creatinine clearance. The serum creatinine should represent a steady state of renal function.
Tabla de la etiqueta
| Creatinine Clearance (mL/min/1.73m2) | Ampicillin/Sulbactam Half-Life (Hours) | Recommended Ampicillin and Sulbactam for Injection Dosage |
|---|---|---|
| 30 | 1 | 1.5 to 3 g q 6h to q 8h |
| 15 to 29 | 5 | 1.5 to 3 g q 12h |
| 5 to 14 | 9 | 1.5 to 3 g q 24h |
— Etiqueta de la FDA: Ampicillin and Sulbactam, Eugia US LLC, vigente desde el 12 de agosto de 2025. Esto es solo una parte de la sección. Leer la etiqueta completa en DailyMed →
Ampicillin sodium and sulbactam sodium en el embarazo
Cita de la parte sobre embarazo (Pregnancy) de la etiqueta aprobada por la FDA. Se muestra en inglés. Pregunte a su médico antes de tomar cualquier medicamento si está embarazada o planea estarlo.
Reproduction studies have been performed in mice, rats, and rabbits at doses up to ten (10) times the human dose and have revealed no evidence of impaired fertility or harm to the fetus due to ampicillin and sulbactam. There are, however, no adequate and well-controlled studies in pregnant women. Because animal reproduction studies are not always predictive of human response, this drug should be used during pregnancy only if clearly needed.
Leer más de esta sección
(see - PRECAUTIONS-Drug/Laboratory Test Interactions section).
— Etiqueta de la FDA: Ampicillin and Sulbactam, Eugia US LLC, vigente desde el 12 de agosto de 2025. Leer la etiqueta completa en DailyMed →
Ampicillin sodium and sulbactam sodium y la lactancia
Cita de la parte sobre lactancia (Nursing Mothers) de la etiqueta aprobada por la FDA. Se muestra en inglés.
Low concentrations of ampicillin and sulbactam are excreted in the milk; therefore, caution should be exercised when ampicillin and sulbactam is administered to a nursing woman.
— Etiqueta de la FDA: Ampicillin and Sulbactam, Eugia US LLC, vigente desde el 12 de agosto de 2025. Leer la etiqueta completa en DailyMed →
Cuándo no se debe usar Ampicillin sodium and sulbactam sodium
Cita de la sección «Contraindications» (contraindicaciones) de la etiqueta aprobada por la FDA. Se muestra en inglés.
The use of ampicillin and sulbactam for injection is contraindicated in individuals with a history of serious hypersensitivity reactions (e.g., anaphylaxis or Stevens-Johnson syndrome) to ampicillin, sulbactam or to other beta-lactam antibacterial drugs (e.g., penicillins and cephalosporins).
Leer más de esta sección
Ampicillin and sulbactam for injection is contraindicated in patients with a previous history of cholestatic jaundice/hepatic dysfunction associated with ampicillin and sulbactam for injection.
— Etiqueta de la FDA: Ampicillin and Sulbactam, Eugia US LLC, vigente desde el 12 de agosto de 2025. Leer la etiqueta completa en DailyMed →
Sobredosis de Ampicillin sodium and sulbactam sodium
Cita de la sección «Overdosage» (sobredosis) de la etiqueta aprobada por la FDA. Se muestra en inglés. Si alguien pudo haber tomado demasiado, llame a Poison Help al 1-800-222-1222 (o al 911 en una emergencia).
Neurological adverse reactions, including convulsions, may occur with the attainment of high CSF levels of beta-lactams. Ampicillin may be removed from circulation by hemodialysis. The molecular weight, degree of protein binding and pharmacokinetics profile of sulbactam suggest that this compound may also be removed by hemodialysis.
— Etiqueta de la FDA: Ampicillin and Sulbactam, Eugia US LLC, vigente desde el 12 de agosto de 2025. Leer la etiqueta completa en DailyMed →
Presentaciones y vía de administración
| Formas farmacéuticas | Inyección, polvo, para solución |
|---|---|
| Vía | Intravenosa · Intramuscular |
| Productos con receta | 35 en el directorio NDC de la FDA |
| Nombres de marca | Unasyn |
Empresas que tienen este medicamento
Empresas en el directorio NDC de la FDA: la empresa que aparece en el envase (fabricante o distribuidor), con su número de productos con receta.
- Eugia US LLC8 productos
- Meitheal Pharmaceuticals Inc.6 productos
- WG Critical Care, LLC4 productos
- Roerig3 productos
- Avenacy, LLC3 productos
- Onesource Specialty Pharma Limited3 productos
- Hikma Pharmaceuticals USA Inc.3 productos
- Sagent Pharmaceuticals3 productos
- NorthStar Rx LLC3 productos
- Armas Pharmaceuticals Inc.3 productos
- Medical Purchasing Solutions, LLC1 producto
- Civica, Inc.1 producto
Historial de aprobación de la FDA
- NDA: Solicitud de nuevo medicamento (NDA): así se aprueba un medicamento nuevo, normalmente de marca.
- ANDA: Solicitud abreviada (ANDA): así se aprueba una versión genérica.
| Solicitud | Patrocinador | Aprobada | Cambios aprobados después |
|---|---|---|---|
| NDA050608 UNASYN | Pfizer | 31 de diciembre de 1986 | 29, el último 5 de noviembre de 2025 2025: Etiquetado · 2025: Etiquetado · 2024: Etiquetado |
Aprobaciones de genéricos (11)
- ANDA065188Hq Speclt Pharma · 25 de noviembre de 2005
- ANDA065222Acs Dobfar Spa · 29 de noviembre de 2005
- ANDA065314Acs Dobfar Spa · 27 de noviembre de 2006
- ANDA065406Acs Dobfar · 22 de diciembre de 2009
- ANDA065403Acs Dobfar · 23 de diciembre de 2009
- ANDA090339Eugia Pharma Speclts · 20 de septiembre de 2010
- ANDA090340Eugia Pharma Speclts · 20 de septiembre de 2010
- ANDA090349Eugia Pharma Speclts · 20 de septiembre de 2010
- ANDA201024Onesource Specialty · 7 de abril de 2014
- ANDA202197Onesource Specialty · 7 de abril de 2014
- ANDA201406Antibiotice · 7 de diciembre de 2015
Escasez
La lista de escasez de la FDA no incluye estos productos.
Retiros del mercado
De los informes de la FDA, vinculados por el código NDC del producto. Un retiro suele afectar solo a lotes concretos: revise el número de lote del envase y pregunte a su farmacéutico. No deje un medicamento por su cuenta.
-
29 de mayo de 2020 · Clase II · Cerrado por la FDA · D-1306-2020
Presence of Particulate Matter: particulate matter identified after reconstitution.
Unasyn (ampicillin sodium/sulbacatam) for injection, 1.5 g* per vial, Rx Only, 10 vials/carton, Made in Italy Distributed by Roerig Division of Pfizer Inc. New York, NY 10017 vial NDC 0049-0013-81, carton NDC 0049-0013-8 — Pfizer Inc.
-
1 de mayo de 2018 · Clase I · Cerrado por la FDA · D-0866-2018
Presence of Particulate Matter: confirmed customer report of the presence of visible particulate matter believed to be red rubber particles from the manufacturing process of the active ingredients.
Ampicillin and Sulbactam for Injection, USP, 3 gram*s/vial, For Intramuscular or Intravenous Use, Sterile, Manufactured for: AuroMedics Pharma LLC, 6 Wheeling Road, Dayton, NJ, NDC 55150-117-20. — AuroMedics Pharma LLC
-
2 de enero de 2018 · Clase I · Cerrado por la FDA · D-0339-2018
Presence of Particulate Matter: A confirmed customer report was received for the presence of visible particulate matter, confirmed as glass, within a single vial.
Ampicillin and Sulbactam for Injection 1.5 g vial, sterile Dry Powder for injection, 10 vials per carton, Distributed by AuroMedics Pharma LLC. 279 Princeton-Highstown Rd. E. Windsor, NJ 08520, NDC 55150-116-20 — Aurobindo Pharma Ltd.
¿Qué significan las clases de retiro?
Clase I: El tipo más grave: existe una probabilidad razonable de que usar el producto cause problemas de salud graves o la muerte.
Clase II: Usar el producto puede causar problemas de salud temporales o reversibles con tratamiento, o la probabilidad de problemas graves es remota.
Clase III: No es probable que usar el producto cause problemas de salud (por ejemplo, un problema de etiquetado o de envase).
Identificadores oficiales
Siguientes pasos
- Encuentre una farmacia cerca de ustedPregunte qué precio le corresponde y si su producto está afectado por un retiro
- Últimos retiros de medicamentos de la FDATodos los medicamentos, los más recientes primero
- UnasynPágina de marca: productos, fabricante y precio
- Eugia US LLCFabricante o distribuidor
- Meitheal Pharmaceuticals Inc.Fabricante o distribuidor
- WG Critical Care, LLCFabricante o distribuidor
- Todos los medicamentos con receta de la A a la ZBusque por nombre genérico, de marca o en español
Fuentes
- Etiqueta aprobada por la FDA en DailyMed (Biblioteca Nacional de Medicina) — Ampicillin and Sulbactam, Eugia US LLC, vigente desde el 12 de agosto de 2025; vía openFDA, datos de la FDA exportados el 13 de noviembre de 2026, consultados el 14 de noviembre de 2026
- NDC Directory (openFDA) — Administración de Alimentos y Medicamentos de los EE. UU. (FDA), datos de la FDA exportados el 13 de noviembre de 2026, consultados el 14 de noviembre de 2026
- Drugs@FDA (openFDA) — Administración de Alimentos y Medicamentos de los EE. UU. (FDA), datos de la FDA exportados el 13 de noviembre de 2026, consultados el 14 de noviembre de 2026
- Drug recall enforcement reports (openFDA) — Administración de Alimentos y Medicamentos de los EE. UU. (FDA), datos de la FDA exportados el 10 de noviembre de 2026, consultados el 14 de noviembre de 2026
- Drug shortages (openFDA) — Administración de Alimentos y Medicamentos de los EE. UU. (FDA), datos de la FDA exportados el 13 de noviembre de 2026, consultados el 14 de noviembre de 2026
La FDA ofrece los datos de openFDA tal cual; pueden estar incompletos. Guíese siempre por la etiqueta que viene con su medicamento. Buscador de informes de retiros de la FDA →
Informar un error → · Información para fabricantes de medicamentos