Medical emergency?Emergency? Call 911. Nearest emergency roomsNearest ERs

Prescription medicine

Dextrose monohydrate, sodium lactate, potassium chloride, magnesium chloride, potassium phosphate, monobasic, and sodium phosphate, monobasic, monohydrate

Official FDA data, not advice

Everything here comes from the U.S. Food and Drug Administration (FDA): the drug label, the NDC Directory, Drugs@FDA, recall reports and the drug shortage list. Each fact shows its source and date.

This page is not medical advice. Talk to your doctor or pharmacist before you start, stop or change any medicine.

In an emergency, call 911. If someone may have taken too much of a medicine, call Poison Help: 1‑800‑222‑1222.

Dextrose monohydrate, sodium lactate, potassium chloride, magnesium chloride, potassium phosphate, monobasic, and sodium phosphate, monobasic, monohydrate key facts

Used for
Ionosol MB and 5% Dextrose Injection is indicated for intravenous administration to infants for treatment of dehydration, acidosis, diarrhea, and burns, but only after administration of an initial priming solution: 15 mL of 5% dextrose and 0.45% Sodium Chloride Injection/kg of body weight. (source)
Prescription or over the counter
Prescription (Rx)
Generic available
No generic listed by the FDA
Latest FDA recall
None listed

Sources: FDA label (October 30, 2025); FDA NDC Directory (November 13, 2026); FDA enforcement reports (November 10, 2026). Not medical advice.

Quick answers

What is Dextrose monohydrate, sodium lactate, potassium chloride, magnesium chloride, potassium phosphate, monobasic, and sodium phosphate, monobasic, monohydrate used for?
The FDA-approved label (Ionosol MB and Dextrose, ICU Medical Inc., October 30, 2025) says: “Ionosol MB and 5% Dextrose Injection is indicated for intravenous administration to infants for treatment of dehydration, acidosis, diarrhea, and burns, but only after administration of an initial priming solution: 15 mL of 5% dextrose and 0.45% Sodium Chloride Injection/kg of body weight. …” This page is not medical advice. Talk to your doctor or pharmacist before you start, stop or change any medicine.
What are the side effects of Dextrose monohydrate, sodium lactate, potassium chloride, magnesium chloride, potassium phosphate, monobasic, and sodium phosphate, monobasic, monohydrate?
The “Adverse Reactions” section of the FDA label (Ionosol MB and Dextrose, ICU Medical Inc., October 30, 2025) begins: “Reactions which may occur because of the solution or the technique of administration include febrile response, infection at the site of injection, venous thrombosis or phlebitis extending from the site of injection, extravasation and hypervolemia. If an adverse reaction does occur, discontinue the infusion, evaluate the patient, institute appropriate therapeutic countermeasures and save the remainder of the fluid for examination if deemed necessary.” This page is not medical advice. Talk to your doctor or pharmacist before you start, stop or change any medicine.
Does Dextrose monohydrate, sodium lactate, potassium chloride, magnesium chloride, potassium phosphate, monobasic, and sodium phosphate, monobasic, monohydrate have a boxed warning?
No. None of the 1 FDA labels we found for this medicine has a boxed warning.
Is there a shortage of Dextrose monohydrate, sodium lactate, potassium chloride, magnesium chloride, potassium phosphate, monobasic, and sodium phosphate, monobasic, monohydrate?
No current shortage is listed by the FDA for the products of this medicine (FDA data from November 13, 2026).
Has Dextrose monohydrate, sodium lactate, potassium chloride, magnesium chloride, potassium phosphate, monobasic, and sodium phosphate, monobasic, monohydrate been recalled?
No recall linked to the products of this medicine appears in the FDA enforcement reports we use.
Who makes Dextrose monohydrate, sodium lactate, potassium chloride, magnesium chloride, potassium phosphate, monobasic, and sodium phosphate, monobasic, monohydrate?
1 company lists prescription products of Dextrose monohydrate, sodium lactate, potassium chloride, magnesium chloride, potassium phosphate, monobasic, and sodium phosphate, monobasic, monohydrate in the FDA NDC Directory, including ICU Medical Inc.

What Dextrose monohydrate, sodium lactate, potassium chloride, magnesium chloride, potassium phosphate, monobasic, and sodium phosphate, monobasic, monohydrate is used for

Quoted from the “Indications and Usage” section of the FDA-approved label.

Ionosol MB and 5% Dextrose Injection is indicated for intravenous administration to infants for treatment of dehydration, acidosis, diarrhea, and burns, but only after administration of an initial priming solution: 15 mL of 5% dextrose and 0.45% Sodium Chloride Injection/kg of body weight. …

— FDA label: Ionosol MB and Dextrose, ICU Medical Inc., effective October 30, 2025. Read the full label on DailyMed →

Label quoted: the one for the most common form (injection, solution, intravenous), Ionosol MB and Dextrose, ICU Medical Inc.; it covers 1 product in the FDA NDC Directory. The side effects, interactions, dosage and pregnancy quotes below come from this same label.

This page is not medical advice. Talk to your doctor or pharmacist before you start, stop or change any medicine.

Boxed warning

A boxed warning (“black box”) is the FDA’s strongest warning on a drug label, for serious or life-threatening risks.

The label quoted above has no boxed warning.

Dextrose monohydrate, sodium lactate, potassium chloride, magnesium chloride, potassium phosphate, monobasic, and sodium phosphate, monobasic, monohydrate side effects

Quoted from the “Adverse Reactions” section of the FDA-approved label. Tell your doctor about any side effect that worries you.

Reactions which may occur because of the solution or the technique of administration include febrile response, infection at the site of injection, venous thrombosis or phlebitis extending from the site of injection, extravasation and hypervolemia. If an adverse reaction does occur, discontinue the infusion, evaluate the patient, institute appropriate therapeutic countermeasures and save the remainder of the fluid for examination if deemed necessary.

— FDA label: Ionosol MB and Dextrose, ICU Medical Inc., effective October 30, 2025. Read the full label on DailyMed →

Dextrose monohydrate, sodium lactate, potassium chloride, magnesium chloride, potassium phosphate, monobasic, and sodium phosphate, monobasic, monohydrate dosage

Quoted from the “Dosage and Administration” section of the FDA-approved label. Your own dose is the one your doctor prescribes: do not change it on your own.

The dose is dependent upon the age, weight and clinical condition of the patient. In infants, Ionosol MB and 5% Dextrose Injection is given only after administration of an initial priming solution: 15 mL of half isotonic saline in 5% dextrose and 0.45% Sodium Chloride Injection/kg of body weight, administered to small infants at a maximum rate of 0.8 mL/minute.

Read more of this section

Infants typically tolerate not more than 150 to 200 mL of Ionosol MB and 5% Dextrose Injection per kg body weight/day. As reported in the literature, the dosage and constant infusion rate of intravenous dextrose must be selected with caution in pediatric patients, particularly neonates and low birth weight infants, because of the increased risk of hyperglycemia/hypoglycemia. In adults, intravenous infusions of Ionosol MB and 5% Dextrose Injection are given postoperatively, at a rate not greater than 4 mL/minute. Drug Interactions Additives may be incompatible. Consult with pharmacist, if available. When introducing additives, use aseptic technique, mix thoroughly and do not store. Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration. See PRECAUTIONS. INSTRUCTIONS FOR USE To Open: Tear outer wrap at notch and remove solution container. Some opacity of the plastic due to moisture absorption during sterilization process may be observed. This is normal and does not affect the solution quality or safety. The opacity will diminish gradually. If supplemental medication is desired, follow directions below before preparing for administration. To Add Medication Prepare additive port. Using aseptic technique and an additive delivery needle of appropriate length, puncture resealable additive port at target area, inner diaphragm and inject. Withdraw needle after injecting medication. The additive port may be protected by covering with an additive cap. Mix container contents thoroughly. To Administer Attach administration set per manufacturer's instructions. Regulate rate of administration per institutional policy. WARNING: Do not use flexible container in series connections.

— FDA label: Ionosol MB and Dextrose, ICU Medical Inc., effective October 30, 2025. Read the full label on DailyMed →

Dextrose monohydrate, sodium lactate, potassium chloride, magnesium chloride, potassium phosphate, monobasic, and sodium phosphate, monobasic, monohydrate in pregnancy

Quoted from the pregnancy part of the FDA-approved label. Ask your doctor before you take any medicine while pregnant or planning a pregnancy.

Category C. Animal reproduction studies have not been conducted with Ionosol solutions. It is also not known whether Ionosol solutions can cause fetal harm when administered to a pregnant woman or can affect reproduction capacity. Ionosol solutions should be given to a pregnant woman only if clearly needed.

— FDA label: Ionosol MB and Dextrose, ICU Medical Inc., effective October 30, 2025. Read the full label on DailyMed →

When Dextrose monohydrate, sodium lactate, potassium chloride, magnesium chloride, potassium phosphate, monobasic, and sodium phosphate, monobasic, monohydrate should not be used

Quoted from the “Contraindications” section of the FDA-approved label.

Solutions containing potassium are contraindicated in diseases where high potassium levels may be encountered.

— FDA label: Ionosol MB and Dextrose, ICU Medical Inc., effective October 30, 2025. Read the full label on DailyMed →

Dextrose monohydrate, sodium lactate, potassium chloride, magnesium chloride, potassium phosphate, monobasic, and sodium phosphate, monobasic, monohydrate overdose

Quoted from the “Overdosage” section of the FDA-approved label. If someone may have taken too much, call Poison Help at 1-800-222-1222 (or 911 in an emergency).

In the event of overhydration or solute overload during therapy, re-evaluate the patient and institute appropriate corrective measures. See WARNINGS and PRECAUTIONS.

— FDA label: Ionosol MB and Dextrose, ICU Medical Inc., effective October 30, 2025. Read the full label on DailyMed →

Forms and how it is given

Dosage formsInjection, solution
RouteIntravenous
Prescription products1 in the FDA NDC Directory
Brand namesIonosol Mb and Dextrose

Companies that list this medicine

Labelers in the FDA NDC Directory: the company named on the package (maker or distributor), with the number of prescription products.

FDA approval history

  • NDA: New Drug Application: how a new (usually brand-name) medicine is approved.
Brand and biologic applications
ApplicationSponsorApprovedLater changes approved
NDA019513
IONOSOL MB AND DEXTROSE 5% IN PLASTIC CONTAINER
Otsuka Icu MedclMay 8, 1986 18, latest September 5, 2013
2013: Manufacturing (CMC) · 2000: Labeling · 2000: Labeling

Shortage status

The FDA drug shortage list does not show these products.

FDA Drug Shortages database →

Recalls

No recall linked to these products (by their NDC code) appears in the FDA enforcement reports.

Official identifiers

RxCUI (RxNorm)800644, 800648
SPL set ID of the quoted label1b457b1d-0e80-4578-ba6f-dedf513fc962
FDA labels (SPL)1
FDA applicationsNDA019513
Active ingredients (FDA)DEXTROSE MONOHYDRATE / MAGNESIUM CHLORIDE / MONOBASIC POTASSIUM PHOSPHATE / POTASSIUM CHLORIDE / SODIUM LACTATE / SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE

Next steps

Sources

  1. FDA-approved label on DailyMed (National Library of Medicine) — Ionosol MB and Dextrose, ICU Medical Inc., effective October 30, 2025; via openFDA, FDA data exported November 13, 2026, retrieved November 14, 2026
  2. NDC Directory (openFDA) — U.S. Food and Drug Administration (FDA), FDA data exported November 13, 2026, retrieved November 14, 2026
  3. Drugs@FDA (openFDA) — U.S. Food and Drug Administration (FDA), FDA data exported November 13, 2026, retrieved November 14, 2026
  4. Drug recall enforcement reports (openFDA) — U.S. Food and Drug Administration (FDA), FDA data exported November 10, 2026, retrieved November 14, 2026
  5. Drug shortages (openFDA) — U.S. Food and Drug Administration (FDA), FDA data exported November 13, 2026, retrieved November 14, 2026

openFDA data is provided by the FDA as is; it may be incomplete. Always rely on the label that comes with your medicine. FDA Enforcement Report search →

Report an error → · Information for medicine makers